Stacking by Device
ICX 7150 stack configuration overview
The exception among 48-port models is the ICX 7150-48ZP, which has eight SPF+ ports on the front panel as shown in the
following figure. Four of these ports, ports 1/2/1 through 1/2/4, can be used as stacking or data uplink ports. The remaining four,
1/2/5 through 1/2/8, can be used only as data uplink ports.
FIGURE 7 ICX 7150-48ZP stacking ports
ICX 7150 stacking topologies
The stacks shown in the following figures show topologies that use only one stacking port per direction. For all models except the
ICX 7150-C12P, it is possible to create a stacking trunk of two ports per direction to improve redundancy and bandwidth. For
more information, refer to
ICX 7150 stacking trunks
on page 96.
The following figures show examples of supported stacking topologies for the ICX 7150-C12P.
FIGURE 8 ICX 7150-C12P linear stack
Ruckus FastIron Stacking Configuration Guide, 08.0.90
92
Part Number: 53-1005572-01