Creating A Linear-Topology Trunk On A Two-Unit Icx 7850 Stack In A Live Environment - Arris Ruckus ICX 7850 Series Configuration Manual

Creating a linear-topology trunk on a two-unit ICX 7850 stack in a
live environment
NOTE
If you try to expand a four-port trunk to an eight-port linear-topology trunk using stack interactive-setup, the default
result would be a ring topology with two four-port trunks. The preferred method to create a linear-topology trunk is to
use the multi-stack-trunk command.
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Stacking by Device
ICX 7850 stack configuration overview
161