Displaying Running Configuration Information - Arris Ruckus ICX 7850 Series Configuration Manual

Stack Management
Displaying stack information
1: 10/2/1 (T0) <---> 11/2/4 (T1)
2: 10/2/2 (T0) <---> 11/2/5 (T1)
Link 12: u11 -- u12, num=2
1: 11/2/1 (T0) <---> 12/3/4 (T1)
2: 11/2/2 (T0) <---> 12/3/5 (T1)
CPU to CPU packets are fine between 12 units.
TABLE 28 Field definitions for the show stack connection command
Field
P0, P1
T0, T1

Displaying running configuration information

The show running-config command displays information about the current stack configuration as shown in the following
example. Some configuration information, such as sz registrar, is added by default.
ICX7750-48F Router# show running-config
Current configuration:
!
ver 08.0.90devT203
!
stack unit 1
module 1 icx7750-48-xgf-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
priority 128
stack-trunk 1/2/1 to 1/2/3
stack-trunk 1/2/4 to 1/2/6
stack unit 2
module 1 icx7750-20-qxg-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
stack-trunk 2/2/1 to 2/2/3
stack-trunk 2/2/4 to 2/2/6
stack unit 3
module 1 icx7750-20-qxg-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
stack-trunk 3/2/1 to 3/2/3
stack-trunk 3/2/4 to 3/2/6
stack enable
stack mac 609c.9f7f.9400
!
!
aaa authentication web-server default local
aaa authentication login default local
enable aaa console
!
no telnet server
username super password .....
!
!
hitless-failover enable
!
!
sz registrar
sz active-list 10.150.35.201
!
!
interface management 1
ip address 10.176.159.215 255.255.255.128
!
end
220
Description
P identifies a stack-port. The 0 or 1 identifies its direction.
T identifies a stack-trunk. The 0 or 1 identifies its direction.
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01