Removing Stacking Ports From An Icx 7750; Creating An Icx 7750 Stacking Link In A Production Environment - Arris Ruckus ICX 7850 Series Configuration Manual

1 S ICX7750-48XGF active
2 S ICX7750-20QXG standby cc4e.2438.7280
3 S ICX7750-20QXG member
active
+---+
=2/1| 1 |2/4==2/4| 3 |2/1==2/4| 2 |2/1=
| +---+ +---+
|
|-------------------------------------|
Will assign standby in 38 sec due to all ready
Standby u2 - protocols ready, can failover
Role history: N: standalone, A: active, S: standby, M: member
U1: N->A
Current stack management MAC is 609c.9f7f.9400

Removing stacking ports from an ICX 7750

Use the no stack-port or the no stack-trunk command to remove stacking ports from a unit.
NOTE
The no stack-port and the no stack-trunk commands cannot remove live stacking ports.
The following example removes stack-port 3/2/1, which has no neighbor.
ICX7750-48F Router# show stack
T=4h19m31.8: alone: standalone, D: dynamic cfg, S: static
ID Type
1 S ICX7750-48XGF active
2 S ICX7750-20QXG standby cc4e.2438.7280
3 S ICX7750-20QXG member
standby active
+---+
| 2 |2/1==2/1| 1 |2/4==2/4| 3 |2/1
+---+
ICX7750-48F Router# configure terminal
ICX7750-48F Router(config)# stack unit 3
ICX7750-48F Router(config-unit-3)# no stack-port 3/2/1
stack-port 3/2/1 is removed

Creating an ICX 7750 stacking link in a production environment

The stack-trunk command cannot be used to form a trunk manually in a live environment. Instead, use the multi-stack-trunk
command. The multi-stack-trunk command configures both ends of a trunk, based on the range of ports you specify for each
side.
NOTE
Configure the same size trunk on either side.
To configure stacking ports in a live system, use the multi-stack-port command.
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
609c.9f7f.9400 128 local
748e.f8f9.6300
standby
+---+ +---+
+---+ |
|
Role Mac Address
609c.9f7f.9400 128 local
748e.f8f9.6300
+---+ +---+
+---+ +---+
Ready
0 remote Ready
0 remote Ready
Pri State Comment
Ready
0 remote Ready
0 remote Ready
Stacking by Device
ICX 7750 stack configuration overview
147