Configuring Stacking Ports In A Live Environment - Arris Ruckus ICX 7850 Series Configuration Manual

• You cannot enter the stack switch-over command until the stack election is completed or until the multi-stack-trunk
command configuration is complete. If you enter the stack switch-over command too early, the following warning
message is displayed.
Please try later, reason: during stack port or trunk deployment.

Configuring stacking ports in a live environment

You can use the multi-stack-port command (similar to the multi-stack-trunk command) to change a live stack-trunk to a stack-
port. The no multi-stack-port command removes a live stack link.
The following example replaces a live stack-trunk with a stack-port on both units.
ICX7750-48F Router(config)#stack unit 1
ICX7750-48F Router(config-unit-1)#multi-stack-port 1/2/4 and 3/2/4
Config changed due to add/del units. Do write mem if you want to keep it
ICX7750-48F Router(config-unit-1)#show stack
T=3h26m25.6: alone: standalone, D: dynamic cfg, S: static
ID Type
1 S ICX7750-48XGF active
2 D ICX7750-20QXG standby cc4e.2438.7280
3 S ICX7750-20QXG member
active
+---+ +---+
=2/1| 1 |2/4--2/4| 3 |2/1==2/4| 2 |2/1=
| +---+ +---+
|
|-------------------------------------|
Will assign standby in 49 sec due to all ready
Standby u2 - protocols ready, can failover
Role history: N: standalone, A: active, S: standby, M: member
U1: N->A
Current stack management MAC is 609c.9f7f.9400
ICX7750-48F Router(config-unit-1)# show running-config
Current configuration:
!
ver 08.0.90devT203
!
stack unit 1
module 1 icx7750-48-xgf-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
priority 128
stack-trunk 1/2/1 to 1/2/3
stack-port 1/2/4
stack unit 2
module 1 icx7750-20-qxg-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
stack-trunk 2/2/1 to 2/2/3
stack-trunk 2/2/4 to 2/2/6
stack unit 3
module 1 icx7750-20-qxg-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
stack-trunk 3/2/1 to 3/2/3
stack-port 3/2/4
stack enable
stack mac 609c.9f7f.9400
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Role Mac Address
609c.9f7f.9400 128 local
748e.f8f9.6300
standby
+---+
+---+ |
|
Pri State Comment
Ready
0 remote Ready
0 remote Ready

Configuring stacking ports in a live environment

Stack Management
209