Using Stack Zero-Touch Provisioning To Create A Two-Unit Icx 7850 Stack With A Ring Topology - Arris Ruckus ICX 7850 Series Configuration Manual

7. (Optional) Enter the show stack command and the show running-config command to check the stack configuration.
ICX7850-32Q Router# show stack
T=12m52.2: alone: standalone, D: dynamic cfg, S: static
ID Type
1 S ICX7850-32Q
2 S ICX7850-48FS
standby
+---+
| 2 |2/1==3/1| 1 |
+---+
Standby u2 - Learn other units for 31 sec, protocols may not be ready in 39 s.
Role history: N: standalone, A: active, S: standby, M: member
U1: N->A
ICX7850-32Q Router# show running-config
Current configuration:
!
ver 08.0.90_b313T233
!
stack unit 1
module 1 icx7850-32q-port-management-module
module 2 icx7800-100g-12port-1200g-module
module 3 icx7800-100g-8port-800g-module
priority 128
stack-trunk 1/3/1 to 1/3/8
stack unit 2
module 1 icx7850-48fs-port-management-module
module 2 icx7800-100g-8port-800g-module
stack-trunk 2/2/1 to 2/2/8
stack enable
stack mac d4c1.9e18.3731
!
!
aaa authentication web-server default local
aaa authentication login default local
enable aaa console
!
no telnet server
username super password .....
!
!
hitless-failover enable
!
!
sz registrar
!
!
end
Using stack zero-touch provisioning to create a two-unit ICX 7850
stack with a ring topology
Before using stack zero-touch provisioning, check all connections to make sure they are correct.
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Role Mac Address
active d4c1.9e18.3731 128 local
standby d4c1.9e18.8dd9
active
+---+
+---+
Pri State Comment
Ready
0 remote Ready
Stacking by Device
ICX 7850 stack configuration overview
157