Stack Management Mac Address - Arris Ruckus ICX 7850 Series Configuration Manual

The following example assigns names to the members of a three-unit stack, based on the building they support.
device# configure terminal
device(config)# stack unit 1
device(config-unit-1)# unit-name building1
device(config-unit-1)# stack unit 2
device(config-unit-2)# unit-name building2
device(config-unit-2)# stack unit 3
device(config-unit-3)# unit-name building3
device(config-unit-3)# end
device# write memory
Automatic copy to member units:
Flash Memory Write (8192 bytes per dot)
.
Copy Done.
device# show running-config
Current configuration:
!
ver 08.0.90
!
stack unit 1
unit-name building1
module 1 icx7750-48-xgf-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
priority 128
stack-trunk 1/2/1 to 1/2/3
stack-port 1/2/4
stack unit 2
unit-name building2
module 1 icx7750-20-qxg-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
stack-port 2/2/1
stack-port 2/2/4
stack unit 3
unit-name building3
module 1 icx7750-48-xgc-port-management-module
module 2 icx7750-qsfp-6port-qsfp-240g-module
module 3 icx7750-6q-6port-qsfp-240g-module
stack-port 3/2/1
stack-port 3/2/4
stack enable
stack mac cc4e.246d.9e00
!
ip route 0.0.0.0/0 10.176.131.129
!
hitless-failover enable
!
interface management 1
ip address 10.176.131.142 255.255.255.128
!
end

Stack management MAC address

The stack is identified in the network by a single MAC address, usually the MAC address of the active controller (the default). If a
new active controller is elected, the MAC address of the new active controller (by default) becomes the MAC address for the
entire stack. However, you can manually configure your stack to use a specified MAC address.
In a stack, the management MAC address is generated by the software and is always the MAC address of the first port of the
active controller. This ensures that the management MAC address remains consistent across stack reboots and helps prevent
frequent topology changes that result from protocol enable, disable, and configuration changes.
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
2 3
Stack Management

Stack management MAC address

195