Manually Creating A Two-Unit Icx 7850 Stack With A Ring Topology - Arris Ruckus ICX 7850 Series Configuration Manual

Manually creating a two-unit ICX 7850 stack with a ring topology

Perform the following steps to manually create a two-unit ICX 7850 stack with a ring topology.
1. (Optional) Enter the show running-config command on each stack unit to check its current configuration.
The following example shows two stacking units each with stacking ports configured.
Unit 1:
ICX7850-32Q Router# show running-config
Current configuration:
!
ver 08.0.90_b313T233
!
stack unit 1
module 1 icx7850-32q-port-management-module
module 2 icx7800-100g-12port-1200g-module
module 3 icx7800-100g-8port-800g-module
stack-port 1/3/1
stack-port 1/3/5
!
!
aaa authentication web-server default local
aaa authentication login default local
enable aaa console
!
no telnet server
username super password .....
!
!
sz registrar
!
!
End
Unit 2:
ICX7850-48FS Router# show running-config
Current configuration:
!
ver 08.0.90_b313T233
!
stack unit 1
module 1 icx7850-48fs-port-management-module
module 2 icx7800-100g-8port-800g-module
stack-port 1/2/1
stack-port 1/2/5
!
!
aaa authentication web-server default local
aaa authentication login default local
enable aaa console
!
no telnet server
username super password .....
!
!
sz registrar
!
!
End
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Stacking by Device
ICX 7850 stack configuration overview
165