Displaying Information About Hitless Stacking - Arris Ruckus ICX 7850 Series Configuration Manual

FIGURE 59 Scenario 3 - Hitless stacking switchover after a priority change

Displaying information about hitless stacking

Use the show stack command to view information pertinent to a hitless stacking switchover or failover. The command output
illustrates the active controller and standby controller, as well as the readiness of the standby controller to take over the role of
active controller, if needed.
ICX7750-26Q Router# show stack
T=11h25m50.2: alone: standalone, D: dynamic cfg, S: static
ID Type
1 S ICX7750-26QXG active
2 S ICX7750-26QXG standby cc4e.2438.7280 240 remote
3 S ICX7750-26QXG member
active
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Role Mac Address
748e.f8f9.6300 255 local
cc4e.2438.7500
standby
Pri State Comment
Ready
Ready
0 remote Ready

Displaying information about hitless stacking

Hitless Stacking
187