Icx 7450 Stack Configuration Overview - Arris Ruckus ICX 7850 Series Configuration Manual

The following example uses the other valid-stack-port set (1/2/5, 1/2/7).
ICX7250-24P Router(config)# stack unit 1
ICX7250-24P Router(config-unit-1)# stack-trunk 1/2/5 to 1/2/6
ICX7250-24P Router(config-unit-1)# stack-trunk 1/2/7 to 1/2/8
The following example creates a linear-topology trunk containing ports 1/2/1 through 1/2/4:
ICX7250-24P Router(config)# stack unit 1
ICX7250-24P Router(config-unit-1)# stack-trunk 1/2/1 to 1/2/4
The following example creates a linear-topology trunk containing ports 1/2/5 through 1/2/8:
ICX7250-24P Router(config)# stack unit 1
ICX7250-24P Router(config-unit-1)# stack-trunk 1/2/5 to 1/2/8
Creating ICX 7250 trunks in a production environment
The stack-trunk command cannot be used in a live environment. Instead, use the multi-stack-trunk command to configure
both ends of a trunk simultaneously.
The following example creates a multi-stack-trunk cross-cabled connection between unit 1 and unit 2 on ports 1/2/7 through
1/2/8 and ports 2/2/5 through 2/2/6.
ICX7250-48 Router(config-unit-1)# multi-stack-trunk 1/2/7 to 1/2/8 and 2/2/5 to 2/2/6
ICX7250-48 Router(config-unit-1)# show stack
T=15d23h18m0.7: alone: standalone, D: dynamic cfg, S: static
ID Type
1 S ICX7250-48
2 S ICX7250-24P
3 S ICX7250-24
4 S ICX7250-48P
active
+---+
=2/5| 1 |2/7==2/5| 2 |2/7--2/5| 4 |2/7--2/5| 3 |2/7=
| +---+
|
|--------------------------------------------------|
Standby u3 - protocols ready, can failover or manually switch over
Current stack management MAC is cc4e.24b4.23e8
The double lines between unit 1 and unit 2 in the previous output indicate a trunk connection with two ports from each unit.

ICX 7450 stack configuration overview

The following table provides an overview of ICX 7450 stacking capabilities. From FastIron release 08.0.30, 4 X 10-Gbps stacking is
available from module 2 as an option.
TABLE 22 ICX 7450 stacking capability
Stacking capability
Topologies supported
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Role Mac Address
active cc4e.24b4.23e8
member cc4e.24b4.8aa8
standby cc4e.24b4.8cc4
member cc4e.24b4.2d84
+---+ +---+
+---+ +---+
ICX 7450
Ring and linear
Pri State Comment
0 local Ready
0 remote Ready
0 remote Ready
0 remote Ready
standby
+---+
+---+ |
|
Stacking by Device
ICX 7450 stack configuration overview
Additional information
Refer to ICX 7450 stacking topologies
109.
on page
107