Converting Stacking Ports To Data Ports On Icx 7150 Devices - Arris Ruckus ICX 7850 Series Configuration Manual

The following example creates a trunk on a live link.
ICX7150-24 Router# configure terminal
ICX7150-24 Router(config)# stack unit 1
ICX7150-24 Router(config-unit-1)# multi-stack-trunk 1/3/1 to 1/3/2 and 2/3/1 to 2/3/2
ICX7150-24 Router(config-unit-1)# show stack
T=35m51.5: alone: standalone, D: dynamic cfg, S: static
ID Type
1 S ICX7150-24
2 S ICX7150-48P
3 D ICX7150-24P
active
+---+
=3/1| 1 |3/3==3/3| 3 |3/1--3/3| 2 |3/1=
| +---+
|
|-------------------------------------|
Will assign standby in 56 sec due to all ready
Standby u2 - protocols ready, can failover
Current stack management MAC is 00e0.5200.0100
ICX7150-24 Router# show stack connection
Probing the topology. Please wait ...
ICX7150-24 Router#
active
+---+
=3/1| 1 |3/3==3/3| 3 |3/1--3/3| 2 |3/1=
| +---+
|
|-------------------------------------|
trunk probe results: 3 links
Link 1: u1 -- u2, num=1
1: 1/3/1 (T0) <---> 2/3/1 (T0)
2: 1/3/2 (T0) <---> 2/3/2 (T0)
Link 2: u1 -- u3, num=2
1: 1/3/3 (T1) <---> 3/3/3 (T1)
2: 1/3/4 (T1) <---> 3/3/4 (T1)
Link 3: u2 -- u3, num=1
1: 2/3/3 (P1) <---> 3/3/1 (P0)
CPU to CPU packets are fine between 3 units.

Converting stacking ports to data ports on ICX 7150 devices

Follow these steps to convert a stacking port to a data port on an ICX 7150 device.
1. Enter global configuration mode.
ICX7150-24 Router# configure terminal
2. Enter configuration mode for the stack unit.
ICX7150-24 Router(config)# stack unit 1
ICX7150-24 Router(config-unit-1)#
The example enters configuration mode on stack unit 1.
3. Use the no stack-port command to remove stacking from one stacking port to convert it to a data port.
ICX7150-24 Router(config-unit-1)# no stack-port 1/3/3
stack-port 1/3/3 is removed.
Ruckus FastIron Stacking Configuration Guide, 08.0.90
Part Number: 53-1005572-01
Role Mac Address
active 00e0.5200.0100 128 local
standby 748e.f882.e418
member cc4e.24b4.729c
standby
+---+ +---+
+---+ +---+ |
|
standby
+---+ +---+
+---+ +---+ |
|
Pri State Comment
Ready
0 remote Ready
0 remote Ready
Stacking by Device
ICX 7150 stack configuration overview
101