Meaning Of The Status Leds - Psup (Mains Module) - Parker Compax3 Operating Instructions Manual

Parker EME
3.2

Meaning of the status LEDs - PSUP (mains module)

PSUP Status LEDs
Control voltage 24 VDC is missing
Error of mains module*
DC power voltage is built up
Phase failure / mains power supply undervoltage
Address assignment CPU active
Address assignment CPU completed
PSUPxx Ready - State
Incorrect wiring of internal communication X30/31
Device in bootloader state
*can be read out in each axis controller
Caution!
When the control voltage is missing there is no indication whether or not high
voltage supply is available.
192-120113 N08 C3I12T11 - December 2010
Compax3 device description
Left LED (green) Right LED (red)
off off
off on
- flashes quickly
on flashes slowly
flashes quickly -
flashes slowly -
on off
flashes slowly flashes quickly
flashes slowly flashes slowly
29