Connector And Pin Assignment C3S - Parker Compax3 Operating Instructions Manual

Parker EME
3.3.2.

Connector and pin assignment C3S

Overview:
Caution!
When the control voltage is missing there is no indication whether or not high
voltage supply is available.
Attention - PE connection!
PE connection with 10mm
Attention - hot surface!
The heat dissipator can reach very high temperatures (>70°C)
Line cross sections of the line connections X1, X2, X3
Compax3 device:
S025V2, S063V2
S100V2, S150V2
S015V4, S038V4, S075V4, S150V4
S300V4
AC - Versorgung
AC - Supply
DC - Versorgung
DC - Supply
Freigabe 24VDC
Enable 24VDC
Further information on the assignment of the plug mounted at the particular
192-120113 N08 C3I12T11 - December 2010
2
via a grounding screw at the bottom of the device.
Cross-section: Minimum... Maximum[mm
0.25 ... 2.5 (AWG: 24 ... 12)
0.25 ... 4 (AWG: 24 ... 10)
0.5 ... 6 (AWG: 20 ... 7)
Compax3
X1
X10
X4 (24VDC)
X4/3
device can be found below!
Compax3 device description
2
]
RS232
PC
SSK1
31