Servo Status Setting - Parker FL-20-C Series Product Manual

Po300.D=1 Encoder frequency-
division output
Encoder frequency-
Po300.D= 1
division output
Encoder frequency-
Po300.D= 0
division output
Encoder frequency-
Po300.D= 0
division output
When output signal is open collector output, frequency must not be higher than 100KHZ,
2000h-04h should not be set too high.

7.2 Servo Status Setting

Servo drive must be guided according to standard 402 protocol.
PA
PB
PA
PB
Fig 7-2-6 Encoder frequency-division output
16
135