Introduction; Items Supplied - Siemens SITRANS FUS1010 Quick Start Manual

Ultrasonic flowmeters

Hide thumbs Also See for SITRANS FUS1010:

Table of Contents

Introduction

1.1

Introduction

This Quick Start Guide is for the Siemens SITRANS FUS1010 IP65 (NEMA 4X), FUH1010

IP65 (NEMA 4X), FUE1010 IP65 (NEMA 4X) Dual Channel/Path flow meters and the

FUH1010 IP65 (NEMA 4X) Interface Detector. It illustrates a typical setup using D-Series

sensors in the Reflect Mode (for Direct Mode see Operating Instruction manual). These

procedures can also be applied to other single and multi-channel models as well.

To use the Siemens Si-Ware program to assist in flow meter installation download the

program at [http://s13.me/ns/cv].

Note

This Quick Start Guide applies to the following FUS1010, FUH1010 and FUE1010 IP65

(NEMA 4X) operating systems: Version 3.03.00 and later / Version 5.03.00 and later.

1.2

● SITRANS FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Transmitter

● SITRANS F Literature CD

● Quick Start Guide

FUS1010 IP65 NEMA 4X & IP66 NEMA 7 Quick Start

Operating Instructions, 01/2013, A5E03086486-AC

Note

For additional items refer to your packing slip.

Table of Contents

Sitrans fuh1010 Sitrans fue1010