Pair A Running Sensor With Your Watch; Pair A Cycling Sensor With Your Watch - Polar Electro Vantage M User Manual

There are two ways to pair a heart rate sensor with your watch:
1. Wear the moistened heart rate sensor.
2. On your watch, go to General Settings > Pair and sync >
Pair sensor or other device and press OK.
3. Touch your heart rate sensor with your watch and wait for it
to be found.
4. Once the heart rate sensor is found, the device ID, for
example, Polar H10 xxxxxxxx is displayed. Press OK to
start pairing.
5. Pairing completed is displayed when you are done.
OR
1. Wear the moistened heart rate sensor.
2. On your watch, press BACK to enter the main menu and
choose Start training to enter pre-training mode.
3. Touch your heart rate sensor with your watch and wait for it to be found.
4. You'll be prompted to pair your watch with the sensor. Accept the pairing request by pressing OK.
5. Pairing completed is shown when you are done.

PAIR A RUNNING SENSOR WITH YOUR WATCH

1. On your watch, go to General Settings > Pair and sync > Pair sensor or other device and
press OK.
2. The watch starts searching for your sensor. Touch your sensor with the watch and wait for it to be
found.
3. Once the sensor is found, the device ID is displayed. Press OK to start pairing.
4. Pairing completed is displayed when you are done.
OR
1. On your watch, press BACK to enter the main menu and choose Start training to enter pre-train-
ing mode.
2. Touch your running sensor with your watch and wait for it to be found.
3. You'll be prompted to pair your watch with the sensor. Accept the pairing request by pressing OK.
4. Pairing completed is shown when you are done.

PAIR A CYCLING SENSOR WITH YOUR WATCH

Before pairing a cadence sensor, speed sensor or a third-party power sensor, make sure they have been
correctly installed. For more information on installing the sensors see their user manuals.
77