Pairing Sensors With Your Watch; Pair A Heart Rate Sensor With Your Watch - Polar Electro Unite User Manual

PAIRING SENSORS WITH YOUR WATCH

Pair a heart rate sensor with your watch

1. Moisten the electrode areas of the strap.
2. Attach the connector to the strap.
3. Fasten the strap around your chest and adjust the strap to fit snugly.
4. On your watch, go to
5. Touch your heart rate sensor with your watch and wait for it to be found.
6. Once the heart rate sensor is found, the device ID, for example,
pairing.
7. Pairing done is displayed when you are done.
When you're wearing a Polar heart rate sensor that's paired with your watch, the watch does not measure heart
rate from the wrist.
Settings > General Settings > Pair and sync and Tap Pair sensor or other
Polar H10 xxxxxxxx
67
device.
is displayed. Tap to start