With Mobile Device Or Tablet; With Computer - Polar Electro Vantage M User Manual

You won't lose any data due to the firmware update. Before the update begins, the data from your
watch is synced to the Flow web service.

WITH MOBILE DEVICE OR TABLET

You can update the firmware with your mobile device if you're using Polar Flow mobile app to sync your
training and activity data. The app will let you know if there's an update available and will guide you
through it. We recommend that you plug in the watch to a power source before starting the update to
ensure flawless update operation.
The wireless firmware update may take up to 20 minutes, depending on your connection.

WITH COMPUTER

Whenever a new firmware version is available, FlowSync will notify you when you connect the watch to
your computer. The firmware updates are downloaded via FlowSync.
To update the firmware:
1. Plug your watch to your computer with the custom cable that came in the box. Make sure that
the cable snaps into place. Align the ledge on the cable with the slot on your watch (marked with
red).
2. FlowSync starts syncing your data.
3. After syncing, you are asked to update the firmware.
4. Choose Yes. New firmware is installed (this may take up to 10 minutes), and the watch restarts.
Please wait until the firmware update has been finalized before you detach the watch from your
computer.
25