Table of Contents
Advertisement
The Polar training app on your M600 is compatible with Bluetooth® Smart heart rate sensors, like Polar H6 and
H7.
The Bluetooth® Smart heart rate sensor must be paired with the Polar app for them to function together. The
pairing takes only a few seconds and ensures that the Polar app receives signals from only your sensors and
devices and allows disturbance-free training in a group. Before entering an event or race, make sure that you do
the pairing at home to prevent interference from other devices.
TO PAIR A POLAR BLUETOOTH ® SMART HEART RATE SENSOR WITH THE POLAR APP ON
YOUR M600
1. Wear the heart rate sensor.
•
Moisten the electrode areas of the strap.
•
Attach the connector to the strap.
•
Adjust the strap length to fit tightly but comfortably. Tie the strap around your chest, just below the chest
muscles, and attach the hook to the other end of the strap.
•
Check that the moist electrode areas are firmly against your skin and that the Polar logo of the connector is
in a central and upright position.
1. Open the Polar app on the M600 by pressing the front button. (You need to exit any other apps first.)
2. Tap Training or press the front button to open the list of sport profiles on your M600.
3. You'll be prompted to pair your M600 with your heart rate sensor. You'll see your heart rate sensor's device
ID, for example, Pair Polar H7 XXXXXXXX.
4. Accept the pairing request by tapping the checkmark icon.
5. You'll see H7 connected when your hear rate sensor is paired with your smartwatch. Also the heart icon
turns to display your heart rate and the circle around the heart rate turns from green to blue.
When you use a Polar Bluetooth Smart® heart rate sensor, the Polar app does not measure heart rate from
your wrist.
65
Advertisement
Table of Contents
