Table of Contents
Advertisement
Configuration Wizard Command Prompt Progressions
Table 5-29 Configuration Wizard
Configuration Wizard
Prompts
Use DHCP to obtain the IP address and DNS server
address for the administrative interface (Yes/No)?
Note: Only if your DHCP response is no,enter the
following information when prompted:
a. IP address (no CIDR format)
b. Netmask
c. Enter a gateway IP address for this
management (administrative) interface:
d. Enter primary DNS server IP address.
e. Do you have a secondary DNS Server (Yes/
No).
f. Do you want to enter the search domains?
g. Enter the search domain (separate multiple
search domains by space):
Restart the administrative interface (Yes/No)?
Enter a valid hostname.
Regenerate the SSL self-signed certificate (Yes/
No)?
Enter the following server attributes:
Central Manager (CM) IP Address:
Device Name: (must be unique)
Device Description
Device Key PassPhrase
NOTE: Remember this passphrase and use it for all
distributed devices!
NOTE
Enter CTRL-C to exit the Configuration Wizard at any time. If you exit without completing the
Customer Response from Collector
We strongly discourage the use of DHCP addressing
because it changes dynamically. A static IP address
is preferred.
Recommended: Respond with no:
a. Enter an IP address
b. Enter a netmask using the form 255.255.255.0.
c. Enter a gateway IP address.
d. Enter the DNS server IP address
yes
e. If
server.
f. Enter
specific domain.
g. Enter search domain(s) separated by spaces; for
example: example.com lan.com dom2.com
Enter yes to restart with the new configuration
settings applied.
Type a hostname when prompted; do not include
the domain; for example: juniperatp1
Not applicable to Collector.
Required: Enter the IP address of the Juniper ATP
Appliance Server All-in-One CM or CoreCM to which
you are connecting [another] Collector in order to
register with and view the Collector in the CM Web
UI.
Enter the Juniper ATP Appliance Collector Device
Name; this identifies the Collector in the Web UI.
Enter a device Description
Enter the same PassPhrase used to authenticate the
Collector to the Central Manager.
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
, enter the IP address of the secondary DNS
yes
if you want DNS lookups to use a
109
Advertisement
Table of Contents
