Updateimage; Wizard - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Table 3-25 upgrade
Example

updateimage

Table 3-26 updateimage
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example

wizard

Table 3-27 wizard
Description
Product(s) CLI
Mode(s)
The following example copies Juniper ATP Appliance software to the Core from a
remote location defined by the path provided.
CoreCM(cm)# upgrade admin@remoteHost.edu:some/remote/
directory
Update or correct the guest-image OS profile used by the detection and analysis
behavioral engine.
The updateimage command will update the guest images from a USB drive
attached to the Juniper ATP Appliance.
All-in-One | Core-CM | Mac Mini OS X Detection Engine
Core
updateimage
built-in
The following example performs a built-in profile update for the Core detection
engine.
JATP (core)# updateimage built-in
Installing image SC-XP-20140617.img...
Previous version of SC-XP-20140617.img exists.
Checking integrity...
Image SC-XP-20140617.img is already installed
Installing image SC-W7-20140521.img...
Previous version of SC-W7-20140521.img exists.
Checking integrity...
Image SC-W7-20140521.img is already installed
Enters the Configuration Wizard. For Configuration Wizard commands and
response, see "Configuration Wizard for the CoreCM Server" in the next section to
follow command prompts and recommended responses.
All-in-One | Core/CM | Collector | Mac Mini Mac OS X
Basic
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
Updates the guest-image on the detection Engine.
59