Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual page 109

Table 5-19 set
proxy {config
<all|http> |
enabled <on|off> |
remove <all|http>}
timezone
uipassword
Example
Config, enable/disable, or remove "all" proxy configs, or remove an HTTP-specific
proxy server.
Tip: Config the proxy for "all" protocols first, and then
change HTTP proxy as needed for management network.
Show the current timezone; example:
set timezone {US/Pacific US/Eastern | US/Central | US/Mountain}
set timezone <tab> shows all options
TIP:
Sets a new Central Manager Web UI admin password.
The following example sets an ip address for the device management interface
eth0.
JATP# set ip interface 10.1.1.1
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
101