Show (Diagnosis Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Juniper Advanced Threat Prevention Appliance

show (diagnosis mode)

Table 4-19 show
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example
78
Sets the logging levels for Juniper ATP Appliance components from diagnosis
mode.
See Also: show (server mode)
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
diagnosis
show
device
{collectorstatus
| | corestatus |
slavecorestatus}
protocol {web |
email}
objects
logging
log error
traceback
log error last
<integer: number
of lines to
display>
The following example displays the connected Traffic Collector status.
osx-1(server)# show devicetype
Device type: slave_core.
Copyright© 2018, Juniper Networks, Inc.
Display connected device statistics for Traffic
Collector, CoreCM, or Mac Mini Detection Engine
"Secondary core."
NOTE: Not available from the Mac Mini CLI.
Displays the session counts for network web or email
protocols. NOTE: Not available from the Mac Mini CLI.
Displays the current number of file objects.
NOTE: Not available from the Mac Mini CLI.
Displays the currently-configured logging level.
See Also: set (diagnosis mode) logging
Displays only the tracebacks (if any) generated by
Juniper ATP Appliance OS process error logs. A traceback is
stack
of functions that were executing when an error
condition was encountered.
Displays n [1-1000] lines of the contents of the
common log file.
h l
Example:
l t 12