Gssreport - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

gssreport

Table 2-8 gssreport
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Sub-Commands
Example
Use the gssreport command to submit reports to Juniper Global Security Services
(GSS), and to display the status of the current GSS report.
See Also: gssreport; diagnosis
All-in-One | Collector | Mac OS X Detection Engine
diagnosis
gssreport status | submit
status - displays the status of the current GSS report.
submit - submits a report to Juniper ATP Appliance GSS.
None
The following examples display the status of a GSS report submission:
hostname # diagnosis
hostname (diagnosis)# gssreport submit
Successfully started GSS report
hostname (diagnosis)# gssreport status
GSS is currently enabled
Last 5-minute GSS report at 2015-07-28 10:34:24.414322:
successfully submitted
Last hourly GSS report at 2015-07-28 10:34:24.468259:
successfully submitted
Last daily GSS report at 2015-07-28 10:34:28.225512:
successfully submitted
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
[mode]
15