Shutdown; Traceroute; Wizard - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Juniper Advanced Threat Prevention Appliance

shutdown

Table 5-26 shutdown
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example

traceroute

Table 5-27 traceroute
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example

wizard

Table 5-28 wizard
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example
See wizard command prompt progression, as follows:
108
Shuts down the Juniper ATP Appliance server.
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Server
shutdown
None
The following example performs a shutdown of the current device.
JATP# shutdown
Displays the route packets trace to a host name or an IP address.
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Server | Collector
traceroute
-h unsigned
integer
string
The following example performs a traceroute of the named device.
JATP# traceroute -h 2 8.8.8.8
Enters the Configuration Wizard. For Configuration Wizard commands and
response, see "Configuration Wizard Command Prompt Progressions" in the next
section to see command prompts and recommended responses.
All-in-One | Core/CM | Collector | Mac Mini Mac OS X
Basic
wizard
None
The following command starts the configuration wizard. See "Configuration Wizard
Command Prompt Progressions" in the next section.
hostname # wizard
Copyright© 2018, Juniper Networks, Inc.
Specifies the number of hops
Names the remote system to be traced.