Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual page 16

Juniper Advanced Threat Prevention Appliance
Note that the prompt in each mode includes the host name of the Juniper ATP Appliance.
Table 1-2 Summary of CLI Modes
Mode
Basic Mode
CM Mode
Core
Configuration
Mode
Collector
Configuration
Mode
Diagnosis
Packet
Capture,
Monitoring,
GSS Reporting
and
Configuration
Mode
Server
Configuration
Mode
Wizard
Configuration
Mode
8
Description
Monitor system operation and issue basic system
commands. This is the default login mode. The following
prompt is displayed:
JATP#
Monitor system history and upgrades from the Core or
vCore in cm (Central Manager) mode.
JATP_Hostname# cm
JATP_Hostname (cm)# ?
To access Core configuration mode in the Core/CM, All-in-
One, and Mac Mini, enter "core" in Basic mode. The prompt
changes to indicate the mode in parentheses:
JATP_Hostname# core
JATP_Hostname (core)# ?
Configure the Juniper ATP Appliance Collector (includes all
commands). To access Collector configuration mode,
enter "collector" in Basic mode. The prompt changes to
indicate the mode in parentheses:
JATP_Hostname# collector
JATP_Hostname (collector)# ?
Check Initial Setup, Diagnose, Monitor, Set GSS, and
Configure the Juniper ATP Appliance (includes all
commands). To access Diagnosis mode, enter
"diagnosis" in Basic mode. The prompt changes to
indicate the mode in parentheses:
JATP_Hostname# diagnosis
JATP_Hostname (diagnosis)# ?
Set up and monitor the system (includes all Basic
commands plus server-specific commands). To access
Server configuration mode, enter "server" in Basic mode.
The prompt changes to indicate the mode in parentheses:
JATP-Hostname# server
JATP-Hostname (server)# ?
Configure the system during installation and setup the
management network and connected Juniper ATP
Appliance components. To access wizard configuration
mode, enter "wizard" in Basic mode. The prompt changes
to indicate the mode in parentheses:
JATP-Hostname# wizard
JATP-Hostname (wizard)# ?
Copyright© 2018, Juniper Networks, Inc.
How to Exit
Enter exit to log
out of the CLI.
Enter exit to
leave cm mode.
Enter exit to
leave server
mode.
Enter exit to
leave server
mode.
Enter exit to
leave diagnosis
mode.
Enter exit to
leave server
mode.
Enter exit to
leave wizard
mode.