Table of Contents
Advertisement
Command Line Interface Conventions
The following conventions are used to present the syntax of command line
interface (CLI) commands in examples and in text.
In examples:
In text:
NOTE:
When entering a keyword, you only have to type enough letters to identify the
word uniquely. For example, typing set adm u ang j12fmt54 is enough to enter
the command set admin user angel j12fmt54. Although you can use this shortcut
when entering commands, all the commands documented here are presented in
their entirety.
Technical Documentation and Support
To obtain technical documentation for any Juniper Networks product, visit
www.juniper.net/techpubs/.
For technical support, open a support case using the Case Management link at
http://www.juniper.net/customers/support/
States, Canada, or Mexico) or 1-408-745-9500 (from elsewhere).
If you find any errors or omissions in this document, contact Juniper Networks at
techpubs-comments@juniper.net.
Anything inside square brackets [ ] is optional.
Anything inside braces { } is required.
If there is more than one choice, each choice is separated by a pipe ( | ). For
example:
set interface { ethernet1 | ethernet2 | ethernet3 } manage
means "set the management options for the ethernet1, the ethernet2, or the
ethernet3 interface."
Variables are in italic type:
set admin user name1 password xyz
Commands are in boldface type.
Variables are in italic type.
or call 1-888-314-JTAC (from the United
Command Line Interface Conventions
About This Guide
7
Advertisement
Table of Contents
