Corecm Cli Commands; Capture-Start - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

CoreCM CLI Commands

capture-start

Table 3-1 capture-start
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Sub-Commands
Example
cm
Table 3-2 cm
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Sub-Commands
Example
Starts packet capture as a means for diagnosing and debugging network traffic and
obtaining stats (not part of the Collector traffic capture engine).
See Also: diagnosis [mode]; copy
All-in-One | Collector | Core | Mac OS X Detection Engine
Diagnosis
capture-start
<IP address> <interface_name>
None
The following example starts a packet capture process on interface eth1 for a
Juniper ATP Appliance with IP address 8.8.8.8:
hostname # diagnosis
hostname (diagnosis)# capture-start 8.8.8.8 eth1
NOTE Address 8.8.8.8 need not be a Juniper ATP Appliance. It is just a host
that the capture filters on.
Enters cm (Central Manager) mode.
See Also: basic [mode];
All-in-One | Core
Basic
cm
None
exit | help | history | upgrade
The following command example enters cm configuration mode:
hostname # cm
hostname (cm)#
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
39