Table of Contents
Advertisement
show (diagnosis mode)
Table 5-24 show
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example
Sets the logging levels for Juniper ATP Appliance components from diagnosis
mode.
See Also: show (server mode); show (collector mode)
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
diagnosis
show
device
{collectorstatus
| | corestatus |
slavecorestatus}
protocol {web |
email}
objects
logging
log error
traceback
log error last
<integer: number of
lines to display>
The following example displays the connected Traffic Collector status.
JATP(diagnosis)# show device collectorstatus
<cr>
JATP (diagnosis)# show device collectorstatus
WEB_COLLECTOR
=========================================================
IP : 10.2.9.68
Enabled : True
Last Seen : 2014-07-25 15:13:17.967000-07:00
Install Date : 2014-06-25 19:03:38-07:00
=========================================================
IP : 10.2.20.3
Enabled : True
Last Seen : 2014-07-28 11:07:42.046000-07:00
Install Date : 2013-11-14 09:25:39-08:00
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
Display connected device statistics for Traffic
Collector, Core, or Mac Mini Detection Engine
"Secondary core."
NOTE: Not available from the Collector CLI.
Displays the session counts for network web or email
protocols. NOTE: Not available from the Collector CLI.
Displays the current number of file objects.
NOTE: Not available from the Collector CLI.
Displays the currently-configured logging level.
See Also: set (diagnosis mode) logging
Displays only the tracebacks (if any) generated by
Juniper ATP Appliance OS process error logs. A traceback is
stack
of functions that were executing when an error
condition was encountered.
NOTE: Not available from the Collector CLI.
Displays n [1-1000] lines of the contents of the
common log file.
NOTE: Not available from the Collector CLI.
Example: show log error last 12
105
Advertisement
Table of Contents
