Show (Server Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

show (server mode)

Table 4-20 show
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
(See the columns
below)
autoupdate
cli
clock
cm
controller
support
description
devicekey
devicetype
dns
eula
firewall [all <|
whitelist]
hostname
interface
[management |
monitoring |
alternate-
exhaust]
ip
name
ntpserver
proxy
Display configurations and status information.
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Server, See Also: show (diagnosis mode)
show
Show the automatic update setting.
Show the CLI setting.
Show the current date and time.
Show the Central Manager IP address.
Show the driver state for interfaces.
Show support status.
Show the server or system description.
Show the device key.
Show the device type.
Show the DNS servers settings.
Show the End User License Agreement.
Show the firewall configuration settings.
Show the system's host name.
Show information about the management
(administrative) network interface eth0, or the
monitoring interface (eth1), or the
alternate-exhaust interface (eth2).
show controller
See Also:
Show the IP address of the management (administrative)
interface eth0.
Show the server name.
Show the Network Time Protocol (NTP) server settings.
Show current proxy configuration.
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
79