Show (Core Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Juniper Advanced Threat Prevention Appliance

show (core mode)

Table 2-1
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example
32
Displays the guest image(s) status or whitelist statistics.
See Also: shutdown; show (diagnostic mode)
All-in-One | Core CM | Mac Mini OS X Detection Engine
Core
show
images
whitelist
alternate-exhaust-
interface
The following example demonstrates the show images command usage:
JATP(core)# show images
The following example demonstrates the show whitelist command usage:
JATP(core)# show whitelist
JATP(core)# show whitelist
Rule Name Hit Count
URI1
URI2
URI3
greatfilesarey
The following example shows how to get the alternate-exhaust interface (eth2)
status:
JATP(core)# show alternate-exhaust interface
Copyright© 2018, Juniper Networks, Inc.
Displays guest image update and status
information.
Displays the name, hit count and the time of last
hit of a user configured whitelist.
Note that when a whitelist rule is deleted, it will be
removed from the list. Updates to existing rule are
not affected by the presence of the rule in the
output, but hit count could increment. Further,
more than one rule can be hit by a single incident.
Displays the status of the alternate exhaust
interface eth2.
Local Time of Last Hit
10 Wed Sep 2 18:16:55 2015
10 Wed Sep 2 18:16:55 2015
10 Wed Sep 2 18:16:55 2015
49 Wed Sep 2 18:20:00 2015