Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual page 93

Table of Contents

Advertisement

Configuration Wizard Prompts
[OPTIONAL]
If the system detects a Secondary Core with an eth2
port, then the alternate CnC exhaust option is
displayed:
Use alternate-exhaust for the analysis engine
exhaust traffic (Yes/No)?
Enter IP address for the alternate-exhaust (eth2)
interface:
Enter netmask for the alternate-exhaust (eth2)
interface: (example: 255.255.0.0)
Enter gateway IP Address for the alternate-exhaust
(eth2) interface: (example:10.6.0.1)
Enter primary DNS server IP Address for the
alternate-exhaust (eth2) interface: (example:
8.8.8.8)
Do you have a secondary DNS server for the
alternate-exhaust (eth2) interface?
Do you want to enter the search domains for the
alternate-exhaust (eth2) interface?
Note: A complete network interface restart can take
more than 60 seconds
Regenerate the SSL self-signed certificate (Yes/
No)?
Enter the following server attributes:
Central Manager (CM) IP Address:
Device Name: (must be unique)
Device Description
Device Key PassPhrase
NOTE: Remember this passphrase and use it for all
distributed devices!
Customer Response from the Mac Mini
Refer to "Configuring an Alternate Analysis Engine
Interface" in the Juniper ATP Appliance Operator's
Guide for more information.
Enter yes to configure an alternate eth2 interface.
Enter the IP address for the eth2 interface.
Enter the eth2 netmask.
Enter the gateway IP address.
Enter the primary DNS server IP Address for the
alternate-exhaust (eth2) interface.
Enter yes or no to confirm or deny an eth2 secondary
DNS server.
Enter yes or no to indicate whether you want to enter
search domain.
Enter yes to create a new SSL certificate for the
Juniper ATP Appliance Server Web UI.
If you decline the self-signed certificate by entering
no, be prepared to install a certificate authority (CA)
certificate.
Required:Enter the IP address of the Juniper ATP
Appliance Server Core/CM or All-in-One.
Enter a Juniper ATP Appliance Mac Mini or Core/CM
Device Name; this identifies the Mac OS X or Core
Engine in the Web UI.
Enter a device Description
Enter the same PassPhrase used to authenticate the
Core or Mac Mini to the Central Manager.
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
85

Advertisement

Table of Contents
loading

Table of Contents