Set (Diagnosis Mode); Set Protocols (Collector Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

set (diagnosis mode)

Table 5-17 set
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example

set protocols (collector mode)

Table 5-18 set protocols
Description
Product(s) CLI
Mode(s)
Syntax
Example
Sets the logging levels for Juniper ATP Appliance components from diagnosis
mode.
See Also: set (server mode); set proxy (collector mode)
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
diagnosis
set logging
all
default
debug
info
warning
error
critical
The following example sets the default logging level for all Juniper ATP Appliance
components.
JATP# set logging all
Enables and disables the HTTP or SMB parser for a Traffic Collector.
See Also: show protocols command in show (collector mode)
All-in-One | Collector
collector
(collector)# set protocols {http [on|off] | smb [on|off]}
The following example enables the SMB parser for lateral detections:
hostname (collector) set protocols smb on
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
Sets logging for all Juniper ATP Appliance components.
Sets logging to the default parameters
Sets logging at the debug level.
Sets logging at the info level.
Sets logging at the warning level.
Sets logging at the error level.
Sets logging at the critical level.
99