Set (Server Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

set (server mode)

Table 2-24 set
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
(Columns below)
autoupdate
{content |
software} {on |
off}
cli timeout secs
clock
cm address
{enable
set support
| disable} |
{localmode}
dns
firewall {all
<backup | flush>
| whitelist <add
| delete |
flush>}
Configure the system settings.
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Server, See Also: set (diagnosis mode); set traffic-filter (collector mode)
set [autoupdate {on | off} | cli timeout secs | clock | cm
address | support {enable | disable} localmode {enable |
disable}| passphrase string | dns | firewall {all <backup
| flush> | whitelist} | hostname string | ip interface
{management | alternate-exhaust}| ntpserver | password |
proxy {config | enabled | remove} | timezone string |
uipassword]
Note: vCore for AWS does not use the following CLI commands:
set ip
set hostname
[Users cannot set static IP address or change the hostname directly on an EC2 AWS
instance]
server mode "set proxy" command is a management network proxy tool; for data
path Collector proxy configurations, refer to
set proxy (collector mode)
Turn on or off automatic product updates.
set autoupdate content on
Sets CLI timeout period in seconds (0 indicates
no timeout).
Sets the current date and time.
Sets the IP address of the Central Manager and
netmask using the slash notation; example:
AAA.BBB.CCC.DD/X
Enables remote SSH login "support" account or
localmode enable|/disable.
Sets DNS (or enables DHCP for DNS) for the manage-
ment interface by default if interface is unspecified.
Backs up or flushes (clears) all current iptables
for a firewall, or adds, deletes or flushes the
current iptables whitelist-specific settings for the
firewall.
The "add" option adds an IP address to the
iptables outbound whitelist.
# set firewall whitelist add
10.1.1.1
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
27