Table of Contents
Advertisement
Configuration Wizard
Prompts
Enter a valid hostname (enter a
unique name)
[OPTIONAL]
If the system detects a
Secondary Core with an eth3
port, then the alternate CnC
exhaust option is displayed:
Use alternate-exhaust for the
analysis engine exhaust traffic
(Yes/No)?
Enter IP address for the
alternate-exhaust (eth2)
interface:
Enter netmask for the
alternate-exhaust (eth2)
interface: (example:
255.255.0.0)
Enter gateway IP Address for
the alternate-exhaust (eth2)
interface: (example:10.6.0.1)
Enter primary DNS server IP
Address for the alternate-
exhaust (eth2) interface:
(example: 8.8.8.8)
Do you have a secondary DNS
server for the alternate-exhaust
(eth2) interface?
Do you want to enter the search
domains for the alternate-
exhaust (eth2) interface?
Note: A complete network
interface restart can take more
than 60 seconds
Regenerate the SSL self-signed
certificate (Yes/No)?
Customer Response
from All-in-One
Type a hostname
when prompted; do
not include the
domain; for example:
juniperatp1
Refer to "Configuring
an Alternate Analysis
Engine Interface" in the
Juniper ATP Appliance
Operator's Guide for
more information.
Enter yes to configure
an alternate eth2
interface.
Enter the IP address for
the eth2 interface.
Enter the eth2
netmask.
Enter the gateway IP
address.
Enter the primary DNS
server IP Address for
the alternate-exhaust
(eth2) interface.
Enter yes or no to
confirm or deny an
eth2 secondary DNS
server.
Enter yes or no to
indicate whether you
want to enter search
domain.
Enter yes to create a
new SSL certificate for
the Juniper ATP
Appliance Server Web
UI.
If you decline the self-
signed certificate by
entering no, be
prepared to install a
certificate authority
(CA) certificate.
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
Customer Response
from Core or Mac Mini
Type a hostname
when prompted; do
not include the
domain; for example:
juniperatp1
Refer to "Configuring
an Alternate Analysis
Engine Interface" in the
Juniper ATP Appliance
Operator's Guide for
more information.
Enter yes to configure
an alternate eth2
interface.
Enter the IP address for
the eth2 interface.
Enter the eth2
netmask.
Enter the gateway IP
address.
Enter the primary DNS
server IP Address for
the alternate-exhaust
(eth2) interface.
Enter yes or no to
confirm or deny an
eth2 secondary DNS
server.
Enter yes or no to
indicate whether you
want to enter search
domain.
Enter yes to create a
new SSL certificate for
the Juniper ATP
Appliance Server Web
UI.
If you decline the self-
signed certificate by
entering no, be
prepared to install a
certificate authority
(CA) certificate.
Customer Response
from Collector
Type a hostname
when prompted; do
not include the
domain; for example:
juniperatp1
[Traffic Collectors do
not send or receive
Core analysis engine
CnC network traffic, so
no eth2 interface is
needed.]
Not applicable to
Collector.
5
Advertisement
Table of Contents
