Show (Collector Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

show (collector mode)

Table 2-27 show (collector mode)
Description
Product(s) CLI
Mode(s)
Subcommands
Syntax
Parameters
Example
show (collector mode)
Table 2-28 show (collector mode)
Description
Product(s) CLI
Mode(s)
Syntax
Displays the Traffic Collector HOMENET settings and all configured subnets, as well
as current traffic filters and the current XFF status (enabled or disabled)
All-in-One | Collector
Collector
homenet | traffic-filter | proxy | honeypot
show
traffic-filter
protocols
proxy {inside
|outside}
honeypot
The following example displays the current Collector proxy inside settings:
collector02(collector)# show proxy inside
Proxy IPs: 10.1.1.1
The following example displays the current traffic filter:
collector02 (collector)# show traffic-filter
Name: CustomRule2, Domain: headqtrs.example.com
The following example displays the current SMB protocol parser setting:
collector02 (collector)# show protocols
The following example displays the current honeypot configuration:
collector02 (collector)# show honeypot ssh-honeypot
Display the currently selected traffic monitoring interface.
All-in-One | Collector
Collector
collector02 (collector)#ow traffic-monitoring-ifc-type
Display the currently selected traffic monitoring interface
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
Shows all traffic filter rules.
Shows current HTTP or SMB protocol parser settings
Shows Traffic Collector proxy for inside or outside
configurations.
Shows the current honeypot configuration.
31