Show (Server Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Juniper Advanced Threat Prevention Appliance

show (server mode)

Table 5-25 show
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
(See columns below)
autoupdate
cli timeout
clock
cm
controller
support
description
devicekey
devicetype
dns
eula
firewall [all <|
whitelist]
hostname
interface
ip
name
ntpserver
proxy
uuid
106
Display configurations and status information.
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Server, See Also: show (collector mode); show (diagnosis mode)
show
Show the automatic update setting.
Show the CLI timeout setting.
Show the current date and time.
Show the Central Manager IP address.
Show the driver state for interfaces.
Show the remote SSH login support status.
Show the server or system description.
Show the device key.
Show the device type.
Show the DNS servers settings.
Show the End User License Agreement.
Show the firewall configuration settings.
Show the system's host name.
Show information about the management (administrative)
network interface eth0 and the monitoring interface eth1.
Show the IP address of the management (administrative)
interface eth0.
Results may show both private and public IP
addresses if the AWS vCore has a public IP.
Show the server name.
Show the Network Time Protocol (NTP) server settings.
Show the current proxy configuration.
Show the system UUID (universally unique ID).
Copyright© 2018, Juniper Networks, Inc.