Setupcheck; Show (Core Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

setupcheck

Table 4-17 setupcheck
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example

show (core mode)

Table 4-18 show
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example
Checks and reports on basic configuration settings and analysis pipeline setup.
All-in-One | Core CM | Mac Mini OS X Detection Engine
diagnosis
setupcheck {all | report | basic | analysis}
all
report
basic
analysis
The following example checks all basic configuration settings as well as the
analysis pipeline:
JATP(diagnosis) # setupcheck all
Displays the guest image(s) status.
See Also: show (server mode); show (diagnostic mode)
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Core
show
images
Displays guest image update and status information.
whitelist
Displays the name, hit count and the time of last hit of a user
configured whitelist.
Note that when a whitelist rule is deleted, it will be removed
from the list. Updates to existing rule are not affected by the
presence of the rule in the output, but hit count could
increment. Further, more than one rule can be hit by a single
incident.
alternate- Displays the status of the alternate exhaust interface eth2.
exhaust-
interface
The following example demonstrates the show images command usage:
JATP(core)# show images
The following example shows how to get the alternate-exhaust interface (eth2)
status:
JATP(core)# show alternate-exhaust interface
Copyright© 2018, Juniper Networks, Inc.
CLI Command Reference Guide
Checks both basic settings and analysis pipelin
Shows report of last setupcheck.
Checks basic configuration settings.
Checks the analysis pipeline.
77