Show (Core Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

show (core mode)

Table 3-21 show
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Example
Displays the guest image(s) status or whitelist statistics.
See Also: show (server mode); show (diagnostic mode)
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Core
show
images
Displays guest image update and status information.
whitelist Displays the name, hit count and the time of last hit of a user
configured whitelist.
Note that when a whitelist rule is deleted, it will be removed
from the list. Updates to existing rule are not affected by the
presence of the rule in the output, but hit count could
increment. Further, more than one rule can be hit by a single
incident.
alternate-
Displays the status of the alternate exhaust interface eth2.
exhaust-
interface
The following example demonstrates the show images command usage:
JATP(core)# show images
The following example demonstrates the show whitelist command usage:
JATP(core)# show whitelist
JATP(core)# show whitelist
Rule Name Hit Count
URI1
URI2
URI3
greatfilesarey
The following example shows how to get the alternate-exhaust interface (eth2)
status:
JATP(core)# show alternate-exhaust interface
Copyright© 2018, Juniper Networks, Inc.
Local Time of Last Hit
10 Wed Sep 2 18:16:55 2015
10 Wed Sep 2 18:16:55 2015
10 Wed Sep 2 18:16:55 2015
49 Wed Sep 2 18:20:00 2015
CLI Command Reference Guide
53