Show (Collector Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Juniper Advanced Threat Prevention Appliance

show (collector mode)

Table 5-23 show
Description
Product(s) CLI
Mode(s)
Subcommands
Syntax
Parameters
Example
104
Displays the Traffic Collector current traffic filters and the current XFF status
(enabled or disabled)
All-in-One | Collector
Collector
traffic-filter | proxy | honeypot
show
traffic-filter
protocols
proxy {inside
|outside}
honeypot
The following example displays the current Collector proxy inside settings:
collector02(collector)# show proxy inside
Proxy IPs: 10.1.1.1
The following example displays the current traffic filter:
collector02 (collector)# show traffic-filter
Name: CustomRule2, Domain: headqtrs.example.com
The following example displays the current SMB protocol parser setting:
collector02 (collector)# show protocols
Copyright© 2018, Juniper Networks, Inc.
Shows all traffic filter rules.
Shows current HTTP or SMB protocol parser
settings.
Shows Traffic Collector proxy for inside or outside
configurations. See also show proxy:
show (server mode)
Shows the current honeypot configuration.
show honeypot ssh-honeypot