Set (Server Mode) - Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual

Juniper Advanced Threat Prevention Appliance

set (server mode)

Table 3-18 set
Description
Product(s) CLI
Mode(s)
Syntax
Parameters
Note: vCore for AWS
does not use the
following CLI
commands:
set ip
set hostname
[Users cannot set static
IP address or change
the hostname directly
on an EC2 AWS
instance]
(See columns below)
autoupdate
{content |
software} {on |
off}
cli secs
clock
cm address
set support
{enable |
disable} |
{localmode}
dns
50
Configure the system settings.
All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Server, See Also: set (diagnosis mode); set (core mode); show (core mode)
set [autoupdate {on | off} | cli timeout secs | clock | cm
address | support {enable | disable} localmode {enable |
disable}| passphrase string | dns | firewall {all <backup
| flush> | whitelist} | hostname string | ip interface
{management | alternate-exhaust}| ntpserver | password |
proxy {config | enabled | remove} | timezone string |
uipassword]
Turn on or off automatic product updates.
set autoupdate content on
Sets CLI period in seconds (0 indicates
no timeout).
Sets the current date and time.
Sets the IP address of the Central Manager and
netmask using slash notation; ex:
Enables remote SSH login "support" account or
localmode enable|/disable.
Sets DNS (or enables DHCP for DNS) for the manage-
ment interface by default if interface is unspecified.
Copyright© 2018, Juniper Networks, Inc.
AAA.BBB.CCC.DD/X