Delta Electronics DVP15MC11T Operation Manual page 53

DVP15MC11T Operation Manual
Note: The power supply for COM/SSI port of DVP15MC11T is 5V power.
When VCC = 5V, connect the power voltage VCC of SSI encoder to pin 15 of COM/SSI interface and 0V
of SSI encoder to pin 8 of COM/SSI interface.
When VCC ǂ 5V, the power is supplied to SSI encoder alone according to the actual power voltage of
the SSI encoder which is connected.

Specification for SSI Absolute Encoder Communication Cable
Please use the shielded pair-twisted cable for CLK+, CLK-, DATA+ and DATA- signal transmission.
_6
6-14