I/O Allocation - Panasonic FP-X0 L14R User Manual

4.1 I/O Allocation

Allocation of I/O Numbers
Unit type
Control unit
Expansion 1st unit
Expansion 2nd unit
Expansion 3rd unit
Note) The ranges of the I/O numbers which are actually used differ depending on the cassettes and units.
Regarding I/O numbers
• Specifying X and Y numbers
On the FP-X and the FP0, the same numbers are used for input and output.
• Expression of numbers for input/output relays
Input relay "X" and output relay "Y" are expressed as a combination of decimal and hexadecimal
numbers as shown below.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Input
X0 to X9F (WX0 to WX9)
X300 to X39F (WX30 to WX39)
X400 to X49F (WX40 to WX49)
X500 to X59F (WX50 to WX59)
I/O number
Output
Y0 to Y9F (WY0 to WY9)
Y300 to Y39F (WY30 to WY39)
Y400 to Y49F (WY40 to WY49)
Y500 to Y59F (WY50 to WY59)