Panasonic FP-X0 L14R User Manual page 231

14.1.4 Table of Special Data Registers for FP-X0 L14 / L30 / L40 / L60
Address
Self-diagnostic error
DT90000
code
DT90001 Not used
DT90002 Not used
DT90003 Not used
DT90004 Not used
DT90005 Not used
DT90006 Not used
DT90007 Not used
DT90008 Not used
DT90009 Not used
Extension I/O verify
DT90010
error unit
DT90011 Not used
DT90012 Not used
DT90013 Not used
Operation auxiliary
DT90014 register for data shift
instruction
DT90015
Operation auxiliary
register for division
instruction
DT90016
Operation error
DT90017
address (hold type)
Operation error
DT90018 address (non-hold
type)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name
The self-diagnostic error code is stored here
when a self-diagnostic error occurs.
-
-
-
-
-
-
-
-
-
When the state of installation of FP-X0
expansion I/O unit has changed since the
power was turned on, the bit corresponding to
the unit No. will turn on. Monitor using binary
display.
-
-
-
One shift-out hexadecimal digit is stored in bit
positions 0 to 3 when the data shift instruction,
F105 (BSR) or F106 (BSL) is executed. The
value can be read and written by executing F0
(MV) instruction.
The divided remainder (16-bit) is stored in
DT90015 when the division instruction F32(%)
or F52(B%) instruction is executed. The
divided remainder (32-bit) is stored in
DT90015 and DT90016 when the division
instruction F33(D%) or F53(DB%) is executed.
The value can be read and written by
executing F0(MV) instruction.
After commencing operation, the address
where the first operation error occurred is
stored. Monitor the address using decimal
display.
The address where an operation error
occurred is stored. Each time an error occurs,
the new address overwrites the previous
address. Monitor the address using decimal
display.
(A: Available, N/A: Not available)
Description
Read Writ-
-ing ing
A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
A N/A
N/A N/A
N/A N/A
N/A N/A
A A
A A
A A
A N/A
A N/A