5.2 Expansion Method
5.2.1 How to Connect With FP-X Expansion Unit
The expansion unit is connected to the control unit with an exclusive expansion cable.
The expansion cable (AFPX-EC08) is packaged with the expansion unit and expansion FP0 adapter.
-
The expansion cables (AFPX-EC30, AFPX-EC80) are sold separately.
How to connect
The procedure is as follows.
○
Remove the expansion cover.
1
○
Fit the expansion cable into the connectors of the control unit and expansion unit.
2
○
Fold the expansion cable to touch the units each other.
3
○
As for the expansion unit at the last position, turn on the terminator setting switch.
4
○
Install the expansion cover.
5
Note:
The total length of the expansion cables should be within 160 cm.
-
Keep the expansion cables away from the devices and wirings generating noises as much as possible.
-
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com