6.4.2 MEWTOCOL Slave Function
Outline of operation
Command and response
Instructions issued by the computer to the PLC are called commands.
-
Messages sent back to the computer from the PLC are called responses. When the PLC receives a
-
command, it processes the command regardless of the sequence program, and sends a response
back to the computer. On the computer side, the execution result of the command can be confirmed by
the transmitted response.
MEWTOCOL-COM sketch
Communication is performed based on the communication procedure of MEWTOCOL-COM.
-
Data is sent/received in ASCII format.
-
The computer has the first right of transmission.
-
The right of transmission shifts back and forth between the computer and the PLC each time a
-
message is sent.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com