Panasonic FP-X0 L14R User Manual page 267

Num-
Name
ber
Integer type data processing instructions
F270 Maximum value
P270 (word data (16-
bit))
F271 Maximum value
P271 (double word
data (32-bit))
F272 Minimum value
P272 (word data (16-
bit))
F273 Minimum value
P273 (double word
data (32-bit))
F275 Total and mean
P275 values (word
data (16-bit))
F276 Total and mean
P276 values (double
word data (32-
bit))
F277 Sort (word data
P277 (16-bit))
F278 Sort (double
P278 word data (32-
bit))
F282 Scaling of
P282 16-bit data
F283 Scaling of
P283 32-bit data
F284 Inclination
P284 output of 16-bit
data
Integer type non-linear function instructions
F285 Upper and
P285 lower limit
control
(16-bit data)
: Available, : Not available,
*1) This instruction is only available for FP-e Ver.1.2 or later.
*2) This instruction is only available for FP-X Ver.2.0 or later, and FPΣ Ver. 3.10 or later.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Ope-
Boolean
rand
MAX S1, Searches the maximum value in the
PMAX S2, D word data table between the "S1" and
"S2", and stores it in the "D". The
address relative to "S1" is stored in
"D+1".
DMAX S1, Searches for the maximum value in the
PDMAX S2, D double word data table between the
area selected with "S1" and "S2", and
stores it in the "D". The address relative
to "S1" is stored in "D+2".
MIN S1, Searches for the minimum value in the
PMIN S2, D word data table between the area
selected with "S1" and "S2", and stores
it in the "D". The address relative to "S1"
is stored in "D+1".
DMIN S1, Searches for the minimum value in the
PDMIN S2, D double word data table between the
area selected with "S1" and "S2", and
stores it in the "D". The address relative
to "S1" is stored in "D+2".
MEAN S1, The total value and the mean value of
PMEAN S2, D the word data with sign from the area
selected with "S1" to "S2" are obtained
and stored in the "D".
DMEAN S1, The total value and the mean value of
PDMEAN S2, D the double word data with sign from the
area selected with "S1" to "S2" are
obtained and stored in the "D".
SORT S1, The word data with sign from the area
PSORT S2, S3 specified by "S1" to "S2" are sorted in
ascending order (the smallest word is
first) or descending order (the largest
word is first).
DSORT S1, The double word data with sign from the
PDSORT S2, S3 area specified by "S1" to "S2" are sorted
in ascending order (the smallest word is
first) or descending order (the largest
word is first).
SCAL S1, The output value Y is found for the input
PSCAL S2, D value X by performing scaling for the
given data table.
DSCAL S1, The output value Y is found for the input
PDSCAL S2, D value X by performing scaling for the
given data table.
RAMP S1, Executes the linear output for the
S2, specified time from the specified initial
S3, D value to the target value.
LIMT S1, When S1>S3, S1→D
PLIMT S2, When S1<S3, S2→D
S3, D When S1<or = S3<or = S2, S3→D
: Not available partially
Description
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
8
*1
10
10
*2 *2
10
*1