Panasonic FP-X0 L14R User Manual page 217

Add-
Item
ress
402
403
404
405
Note1) The controller output settings must be specified for using the pulse output and PWM output.
The output specified for the pulse output and PWM output cannot be used as normal output.
Note2) X5 can be also used as the home input of the pulse output CH0 to CH1.
For using the home return function of pulse output, be sure to make the home input settings. In
that case, X2 cannot be set as the high-speed counter.
Note3) L14 type:
For the pulse output CH0, the home return cannot be performed with the deviation counter clear.
Note4) L30/L40/L60 type:
When performing the home return with the deviation counter clear for the pulse output CH0, Y3
should be set to the normal output as the Y3 is used for the deviation counter clear signal.
For the pulse output CH1, the home return cannot be performed with the deviation counter clear.
Note5)The settings of Nos. 403 to 405 are specified for each contact on the screen.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Name Default value
Pulse/
PWM output
settings CH0:
(Y0, Y1) Normal output
(X5)
►For L14
Pulse/
CH0:
PWM output
Normal output
settings
(Y0 to Y3)
(X5, X7)
CH1:
►For
Normal output
L30/L40/L60
Pulse catch
Not set
input settings
Interrupt input
Not set
settings
Interrupt edge
setting for Leading edge
controller input
Description
Normal output (Y0, Y1)
Pulse output (Y0, Y1)
Pulse output (Y0, Y1) / Home inputX5
PWM output (Y0), Normal output (Y1)
Normal output (Y0, Y1)
Pulse output (Y0, Y1)
Pulse output (Y0, Y1) / Home input X5
PWM output (Y0), Normal output (Y1)
Normal output (Y2, Y3)
Pulse output (Y2, Y3)
Pulse output (Y2, Y3) / Home input X7
PWM output (Y2), Normal output (Y3)
The pressed contact is set for the pulse
catch input.
The pressed contact is set for the interrupt
input.
The pressed contact is up and set to trailing
edge.