Panasonic FP-X0 L14R User Manual page 105

6.6.6 Monitoring When Using PC(PLC) Link
When using a PC(PLC) link, the operation status of the links can be monitored using the following relays.
Transmission assurance relays
For PC(PLC) link 0: R9060 to R906F (correspond to unit no. 1 to 16)
For PC(PLC) link 1: R9080 to R908F (correspond to unit no. 1 to 16)
If the transmission data from a different unit is being used with the various PLCs, check to make sure the
transmission assurance relay for the target unit is on before using the data.
Relay no. R906F R906E R906D R906C R906B R906A R9069 R9068 R9067 R9066 R9065 R9064 R9063 R9062 R9061 R9060
Unit no. 16
Conditions
for on/off
Operation mode relays
For PC(PLC) link 0: R9070 to R907F (correspond to unit no. 1 to 16)
For PC(PLC) link 1: R9090 to R909F (correspond to unit no. 1 to 16)
The operation modes (RUN/PROG.) can be checked for any given PLC.
Relay no. R907F R907E R907D R907C R907B R907A R9079 R9078 R9077 R9076 R9075 R9074 R9073 R9072 R9071 R9070
Unit no. 16
Conditions
for on/off
PLC link transmission error relay R9050
This relay goes on if a problem is detected during transmission.
Relay no.
Unit no. 16
Conditions
for on/off
Key Point: Monitoring the PC(PLC) link status
Using a programming tool, the PC(PLC) link status items, such as the transmission cycle time and the
number of times that errors have occurred, can be monitored.
Using FPWIN GR: Select [Status Display] under [Online] in the menu. Click the [PC link] button after the
Using FPWIN Pro: Select [PLC Link Status] under [Online] in the menu.
Note: Remote programming of the linked PLCs is not possible from the programming tool.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
15 14 13 12
ON: When the PC(PLC) link is normal
OFF: When transmission is stopped, a problem has occurred, or a PC(PLC) link is not used
15 14 13 12
ON: When the unit is in the RUN mode
ON: When the unit is in the PROG. mode
15 14 13 12
ON: When a tramission error has occurred in the PC(PLC) link,
or when there is an error in the setting for the PC(PLC) link area
OFF: When there is no transmission error
[Status Display] screen is shown.
11 10 9 8
11 10 9 8
R9050
11 10 9 8
7 6 5 4
7 6 5 4
7 6 5 4
3 2 1
3 2 1
3 2 1