Table Of Specifications - Panasonic FP-X0 L14R User Manual

12.1 Table of Specifications

12.1.1 General Specifications
Item
Ambient temperature
Storage temperature
Ambient humidity
Storage humidity
Breakdown voltage
Note1) Note2)
Insulation resistance
Note1)
Vibration resistance
Shock resistance
Noise immunity
Operation condition
Overvoltage category
Pollution level
Weight
Note1)The tool port is not isolated from the internal digital circuit.
Note2) Cutoff current: 5 mA (Factory default setting)
12-2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
0 to +55 C
40 to +70C
10 to 95%RH (at25C non-condensing)
10 to 95%RH (at25C non-condensing)
Between input terminal and output terminal
Between transistor output terminals and relay output
terminals
Between input terminals and power supply/earth
terminals
Between relay output terminals and power
supply/earth terminals
Between transistor output terminals and power
supply/earth terminals
Between power supply terminal and earth terminal
Between Input terminal and transistor output terminal
Between input terminal and output terminal
Between transistor output terminals and relay output
terminals
Between input terminals and power supply/earth
terminals
Between output terminals and power supply/earth
terminals
Between power supply terminal and earth terminal
5 to 8.4 Hz, single amplitude of 3.5 mm, 1 cycle/min
8.4 to 150 Hz, constant acceleration of 9.8 m/s
10 min on 3 axes
2
Shock of 147 m/s , 4 times on 3 axes
1500 Vp-p with pulse widths 50 ns and 1µs (based on in-house
measurements) (AC power supply terminal)
Free from corrosive gases and excessive dust
Category II
Pollution level 2
L14: Approx. 280 g, L30: Approx. 450 g, L40: Approx. 530 g,
L60: Approx. 730 g
Description
2300 V AC for 1 min.
1500 V AC for 1 min.
500 V AC for 1 min.
100 M or more
(500 V DC
measured with a
megohm-meter)
2
, 1 cycle/min,